x
Breaking News
More () »

Lost our signal? Here's how to rescan your TV and make sure you can see shows on 13News Now.

In order to enjoy our programming, you might need to do some rescanning on your television. So, let's get to it!
Credit: 13News Now

NORFOLK, Va. — 13News Now is performing some work on our transmitter, and if you use an antenna, this may mean you'll lose our signal and need to rescan your TV to get it back.

Here are full instructions on how to rescan your television:

We've also rounded up some frequently asked questions regarding rescans.

What is it?

If you watch TV with an antenna or use a digital converter box, this will affect you in the coming weeks.

Why do I need to Re-Scan?

If you want to keep watching your favorite shows on 13News Now including Jeopardy! and Wheel of Fortune, you’ll need to re-scan.

How Do I do it?

Even among manufacturers, each television has its own steps for rescanning. Every remote is different, too, and often the words ENTER, OK, or SELECT are interchangeable. The process is essentially the same.

In general, you need to get into the brains of your television to TELL it what you want to see. If you still have the owner's manual for your TV or converter box, now would be a great time to find it. We have included links here to popular television brands. You can use those links to find your model of television (usually shown on the rear of your set) to get the manual that matches.

To begin scanning for channels, use your remote to find the MENU or SETUP or SETTINGS function. The UP/DOWN and LEFT/RIGHT buttons help you move from step to step through the on-screen menu.

GENERAL GUIDE

1 – Press the MENU button on your television or converter box remote.

2 – Go to SETUP or SETTINGS.

3 – Go to INSTALLATION or SYSTEM or CHANNELS.

4 – Go to AUTOPROGRAM, AUTOSCAN, AUTOTUNING, PROGRAM CHANNELS, or SCAN CHANNELS.

5 – Press ENTER, OK, or SELECT to start the scan.

6 – Some televisions may warn you that starting a scan will reprogram your channels. That's okay! Reprogramming your tuner is exactly what you want to do to access the upgrades and new channels.

7 – Once the scan starts, it can take just a few minutes or 15 – 30 minutes to complete. DON"T stop the process once it starts.

8 – At this point, your scan should be done. Many televisions quit the process on their own, with others, you may need to select OK or EXIT on your remote.

NOTE: Some manufacturers have you use the LEFT/RIGHT arrow to access menu functions. Sometimes they throw you a curveball and make the CHANNEL UP/DOWN and VOLUME UP/DOWN double as menu navigation. It can be a bit tricky, but if you're familiar with your television remote, you already know this stuff.

What now?

If all has gone according to plan, you’ll be getting a stronger signal from 13News Now, which means a better picture of all your favorite shows on 13News Now!

Make sure your antenna has a clear, 360-degree view with no obstructions. If you are using a rabbit-ears-style indoor antenna, you may need to adjust it to maximize your digital signal. Unlike the "old days," if the digital signal is too weak, your tuner will not be able to decode and display the channel.

Before You Leave, Check This Out